System designed for application on verandas, glass roofs, winter gar dens, etc. Its application on glass surfaces provides us with signifi cant solar protection, improving significantly the thermalinsulation, this directly affecting the comfort and economy of air conditioning of the spaces. In addition to the normal application, the variant Versiplan Pro Air allows us to expand the functio nality of this system thanks to the possibility of cantilevered installa tion, with a kit specifically designed for its assembly using a goal post structure andanchored directly to the wall, with no need to install it on a pre-existing structure. The ver satility of this productis added to a very wide range of solutions propo sed by Siplan, to createthe desired comfort and well-beingin home or business spaces. The tension cartrid - ges will be delivered fully assembled inside of the guides. Possibility of putting the guide where required by the roof supports or zone to install the awning.It is possible to install a third or fourth guide when its mea surements so require. The maximum assembly dimensions are: -Pro:Maximum width: 6m with two guides. 7m with three guides the cen tral one without tension. Maximum projection: 6 m. (5 m. for widths more than 6 m). -Pro Air:Maximum width: 6m with two guides.7m with three guides the central one without tension. Maxi mum projection: 4m (5m leaving the goal posts, at maximum 4 m from the wall and with a maximum overhangof 1 m for the guides). Note: The guides can be moved toward the interior a maximum of 0.3 metres each (maximum distance from the outside of the cap of the canvas profile to the centre of the guide).